Atgroup.Software
INICIO / PRODUCTOS / STRATASYS / FORTUS 400mc


stratasys

Productos

FORTUS 400mc

Engineered to provide accurate, repeatable performance. This workhorse uses a variety of production-grade thermoplastics. Customization allows you to select material packages and build-envelope sizes so you pay only for the capabilities you need.

ESPECIFICACIONES TÉCNICAS:

System Highlights:
• Has the most material options. Choose material(s) ideal for your applications.
• Larger build envelope and multiple material bays for longer unattended operation
• 2.0 X's faster than the Fortus 200mc
• Best surface finish and feature detail with 0.005 inch (0.127 mm) layer thickness
• Most configurable system
• Capable of multiple color parts in a single build

System Size (XYZ):
50.45 x 35.25 x 77.25 inches (1281 x 895 x 1962 mm)

Standard Capacity Build Envelope:
14 x 10 x 10 inches (355 x 254 x 254 mm)
Two auto load canister bays of 92 cubic inches each
One build material bay
One support material bay

Large Capacity Build Envelope Option:
16 x 14 x 16 inches (406 x 356 x 406 mm)
Four auto load canister bays of 92 cubic inches each
Two build material bays
Two support material bays

Thermoplastic Build Materials:
ABS-M30 thermoplastic
ABS-M30i thermoplastic
ABSi thermoplastic
PC-ABS thermoplastic
PC thermoplastic
PC-ISO thermoplastic
ULTEM* 9085 thermoplastic
PPSF thermoplastic

Achievable Accuracy:
Parts are produced within an accuracy of +/- .005 inch or +/- .0015 inch per inch whichever is greater (+/- .127mm or +/- .0015 mm per mm whichever is greater).

Network Communication:
10/100 base T connection. Ethernet protocol

Operating Environment:
Maximum room temperature of 85°F (29.4°C).
Maximum room dew point of 78°F (25.6°C).

Power Requirements:
230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)

Software:
InsightTM
Control CenterTM
FDM TEAMTM (optional advanced software)

CARACTERÍSTICAS

Parts are produced within an accuracy of +/- .005 inch or +/- .0015 inch per inch whichever is greater (+/- .127 mm or +/- .0015 mm per mm whichever is greater).

Additional capacity for longer unattended builds
Standard capacity
- 14 x 10 x 10 inch (355 x 254 x 254 mm)
- One build material bay
- One support material bay
Large capacity
- 16 x 14 x 16 inch (406 x 356 x 406 mm)
- Two build material bays
- Two support material bays

Highest resolution and feature detail capability

Multiple throughput (build speed) options
- 0.013 and 0.010 inch (0.330 and 0.254 mm) for faster throughput
- 0.007 inch (0.178 mm) for fine feature detail and surface finish
- 0.005 inch (0.127 mm) for highest feature detail and best surface finish