Estación de Acabados
There's virtually no preparation needed to smooth your parts.
ESPECIFICACIONES TÉCNICAS:
System Size (XYZ)
52.5 x 32 x 46 inches (1333.5 x 812.8 x 1168.39 mm)
Chamber Size (XYZ)
13 x 16 x 20 inches (330 x 406 x 508 mm)
Compatible Materials
ABS-M30
ABS-M30i
ABSi
ABSplus
ABS-P400
Smoothing Station Fluid (SSF)
To order SSF, simply email MicroCare Corporation at www.smoothingfluids.com
Local regulations for use of industrial solvents must be observed.
Operator Attendance
Intermittent operator attendance to expose parts.
Operating Environment
Requires 4 in (102 mm) exhaust to outside
Well ventilated area Maximum room temperature of 85°F (26.7°C) and humidity of <65% non-condensing
Altitude up to 10761 feet (3280m)
Smoothing Station Power Requirements
208-230 VAC, 50/60 Hz, 20 amp dedicated circuit
Additional Requirements
Compressed air, minimum of 5 CFM @ 30 psi
4 in (102mm) exhaust to outside
Safety Standards
CE Certified