Atgroup.Software
INICIO / PRODUCTOS / STRATASYS / FORTUS 360mc


stratasys

Productos

FORTUS 360mc

Designed for users with challenging applications that require greater accuracy and repeatability.

ESPECIFICACIONES TÉCNICAS:

System Highlights:
• Greater throughput than smaller Stratasys systems
• High-accuracy and repeatability
• High resolution and feature detail
• Two build envelope options
• Can build in multiple colors

System Size (XYZ):
50.45 x 35.25 x 77.25 inches (1281 x 895.35 x 1962 mm)

Standard Capacity Build Envelope:
14 x 10 x 10 inches (355 x 254 x 254 mm)
Two auto load canister bays of 92 cubic inches each
One build material bay
One support material bay

Large Capacity Build Envelope Option:
16 x 14 x 16 inches (406 x 356 x 406 mm)
Four auto load canister bays of 92 cubic inches each
Two build material bays
Two support material bays


Thermoplastic Build Materials:
ABS-M30 thermoplastic
PC-ABS thermoplastic
PC thermoplastics


Layer Thickness (material dependant):
0.013 inch (0.330 mm)
0.010 inch (0.254 mm)
0.007 inch (0.178 mm)
0.005 inch (0.127 mm)

Achievable Accuracy:
Parts are produced within an accuracy of +/- .005 inch or +/- .0015 inch per inch whichever is greater(+/- .127mm or +/- .0015 mm per mm whichever is greater).*

Network Communication:
10/100 base T connection. Ethernet protocol

Operating Environment:
Maximum room temperature of 85°F (29.4°C).
Maximum room dew point of 78°F (25.6°C).

Power Requirements:
230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)

Software:
InsightTM
Control CenterTM
FDM TEAMTM (optional advanced software)

CARACTERÍSTICAS

Parts are produced within an accuracy of +/- .005 inch or +/- .0015 inch per inch whichever is greater(+/- .127 mm or +/- .0015 mm per mm whichever is greater).

Additional capacity for longer unattended builds
Standard capacity
- 14 x 10 x 10 inch (355 x 254 x 254 mm)
- One build material bay
- One support material bay
Large capacity
- 16 x 14 x 16 inch (406 x 356 x 406 mm)
- Two build material bays
- Two support material bays

Highest resolution and feature detail capability

Multiple throughput (build speed) options
- 0.013 and 0.010 inch (0.330 and 0.254 mm) for faster throughput
- 0.007 and 0.005 inch (0.178 and 0.127 mm) for fine feature detail and smoother surface finish